29
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
The HDD is initialized and put into operation when the device is started for
the first time.
Depending on the number and capacity of the installed hard disks, var-
ious messages and dialogs are displayed during the initial startup and
initialization.
➡
Confirm the messages if necessary.
➡
Follow the instructions given in the dialogs.
➡
Observe the corresponding “Configuration” documentation.
➡
Load the “Default system parameters” as the first step of the config-
uration.
