dallmeier DOMERA DDZ4010 HS/HD Series, Installation And Configuration Manual

Page: 93 / 184

DDZ40(10)(20)-YY/HS/HD
www.dallmeier.com 93
Fig. 12-16
Dark gray areas in the timetable represent inactive periods.
During inactive periods the messaging function is disabled and no alarm actions are
executed .
By default, the entire period (24 hours) in the timetable is inactive.
Select Active Periods

Click active .

In the timetable, click and hold the left mouse button and draw a rectangle over a rel-
evant period.

Release the mouse button.

Repeat the last two steps until all relevant active periods are selected.
Fig. 12-17
Light gray areas in the timetable represent active periods.
During active periods the
messaging function
is
enabled
and
alarm actions
are
ex-
ecuted
.
In the example shown ( Fig. 12-17 ) the period from 02:00 to 06:00 am is active. During
this period messages are sent out and alarm actions are executed.

Confirm with
oK
if you do not want to make any additional settings.