dallmeier DLS 24 S1, Installation And Configuration Manual

Page: 53 / 215

53 Dallmeier electronic GmbH & Co.KG
7 Setting sequencer
It is the task of the sequencer to display the video pictures of the
connected video camera on the monitor in sequence at the specified
interval. The condition for correct setting of the sequencer is that
all cameras relevant for the sequencer mode are connected to the
system.
NOTE
In order for sequence switching to occur on a split
in Live mode, the selected split must be assigned
Monitor Split P when configuring the splitter (see
Chap. Splitter function).
This dialog is accessed via:
Setup > System > Display > Sequencer
7.1 Selecting cameras for the sequencer
All connected cameras are highlighted in yellow in the Cameras
field of the Sequencer dialog.
¾
Now click the cameras (camera numbers), which you would like
to include for the display sequence. The order can be selected
as desired here.
The selected cameras and their
order are displayed in the Display
Sequence field.
¾
If you click the button with the
camera symbol (A), the list of
active cameras is updated.
Fig. 7-1
A