DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
35
Dallmeier electronic
Ø
Set
Brightness
,
Contrast
and
Saturation
.
Ø
Control the images displayed in the splits.
Ø
If necessary click
Default
to reset the settings.
Ø
Finally close the panel with a click on the
VGA
button.
The settings will be saved automatically. They will be valid after a
reboot as well.
6.7
Audio settings
Volume and signal level of a PRemote audio connection (intercom/
Voice Talk) can be adjusted with the graphical user interface.
Please note that these settings will only affect the intercom. The
audio settings for recording remain unchanged.
Ø
Click the
VGA/Audio settings
button.
Ø
Select the
Audio
tab.
Fig. 6-16
Ø
Set the local speaker’s
Volume
.
Ø
Set the volume of the output signal with
Level OUT
.
Ø
Set the volume of the received signal with
Level IN
.
Ø
Set the volume of the local microphone output (speaker) with
Micro
.
Ø
Check the settings.
Ø
Finally close the panel with a click on the
VGA/Audio settings
button.
The settings will be saved automatically. They will be valid after a
reboot as well.
Summary of Contents for DLS 16
