![background image](http://html1.mh-extra.com/html/dallmeier/dis-4-m-srs/dis-4-m-srs_commissioning_3320108018.webp)
DIS-4/M SRS
18
www.dallmeier.com
➡
Insert the module into the guide rails (top and bottom).
➡
Carefully slide the module into the module rack.
➡
Ensure that you slide it straight. Do not use any force.
The module is inserted correctly when it has been fully slid in and
engaged.
➡
The front cover of the module must be flush with the edge of the
module rack housing.
➡
Secure the module in the module rack using the four screws on the
front cover.
➡
Then install the next module as described above.