dallmeier DF5400HD-DN/IR, Commissioning

Page: 34 / 52

DF5400HD-DN/IR
34 Rev. 1.0.2 | © 2018 Dallmeier | www.dallmeier.com
❻
➡ Connect the pre-assembled RJ45 patch cable of the camera
(Fig. 10 -
A
) to an IEEE 802.3af compliant PoE switch or PoE injec -
tor (midspan device) in your local area network (LAN).
There are different ways to connect the camera to your LAN:
• Use the provided “Cat.5e RJ45 inline coupler STP” (Fig. 11 and
Fig. 13) if the patch cable that is coming out of your wall is termi -
nated with an RJ45 (8P8C) modular plug (male connector).
• Use the provided “E-DAT modul Cat.6
A
8(8) jack, T568A” (Fig. 12) if
the patch cable that is coming out of your wall ends in bare wires.
Fig. 11
Cat.5e RJ45 inline coupler STP
Fig. 12
E-DAT modul Cat.6
A
8(8) jack, T568A