dallmeier DF5250HD-DN/IR, Commissioning, Page: 38 / 52

DF5(X)50HD-DN/IR Commissioning
38 Rev. 1.0.0 | © 2019 Dallmeier | www.dallmeier.com
❽
➡ Connect your PoE switch or PoE midspan device to the mains
socket and switch it on.
➡
Establish an Ethernet connection to the camera with your web
browser (see section “Establishing the Connection” on page 43).
➡
Log in to the user interface of the camera (see section “Login” on
page 45).
➡ Open the “Lens control” dialog of the camera.
➡
Point the camera at your scene (loosen the respective hexagon
socket head cap screw with the provided hex key L-wrench as illus -
trated in Fig. 17 and Fig. 18 and tighten it again when finished).
➡ Adjust the focal length (zoom) and the focus position in the
“Lens control” dialog of the camera.
➡
Repeat the last two steps until the captured scene meets your
requirements.