DF4900HD / DF4500HD
www.dallmeier.com
29
9.2
Alarm Hosts
The device provides event-triggered messaging to various alarm hosts.
Note that
• the device and the relevant alarm host must be located in the same LAN or must be
able to communicate via a gateway.
• a DaVid Protocol
4
capable software for message evaluation (e.g. PGuard advance
5
)
must be running on the relevant alarm host.
Click
Network
>
Alarm hosts
.
If no alarm host has yet been set, only the
New ...
item is displayed.
Click
Network
>
Alarm hosts
>
New ...
.
The configuration menu is expanded with the
Alarm host 1
item and the related dialogue
is displayed.
To edit an already set alarm host, click the related item in the configuration menu.
9.2.1
Settings
Select the
Settings
tab.
Fig. 9-2
Enter the name of the alarm host into the
Name
field.
Enter the
iP address
of the alarm host.
Activate the
active
checkbox to enable the messaging function.
Confirm with
oK
.
The item in the configuration menu and the title of the dialogue is automatically updated
with the entered alarm host name after saving the settings.
4
Dallmeier Video Protocol
5
Dallmeier evaluation and management software for messages
