dallmeier DF2000A, Installation And Configuration Manual

Page: 7 / 41

7
Dallmeier electronic GmbH & Co.KG
2 For your safety
Only use the camera if it is in proper technical working condition,
for the intended purpose and while keeping safety and potential
dangers in mind. Observe the technical specifications and the
corresponding instructions and/or documentation. Have
malfunctions that could compromise safety eliminated immediately!
This applies especially for damage to the power supply.
! ! ! ! !
Use professionals
Installation, mounting, connection, start-up and configuration
of the DF2000A may only be performed by trained and authorized
professionals (installers).
As far as not expressly specified otherwise, this specification
also applies for the maintenance, testing and repair of the
camera.
! !
! !
!
Read and understand instructions
Read the documentation for the camera carefully and completely
before using the camera.
! ! ! ! !
Observe the rated voltage
The applied voltage must constantly match the rated voltage of
the camera (see technical data).
! ! ! ! !
Protection against condensation
Wait approx. 8 hours for the camera to reach room temperature
before starting it up.
! !
! !
!
Expansion components/peripheral devices
Use only expansion components conforming with the technical
specifications.
! ! ! ! !
Connection of the camera
Connection of the camera to a recording system or control panel
may only occur while the camera is de-energized. Pull the mains
plug!
! ! ! ! !
Penetration of foreign bodies and liquids
The camera may not be subjected to moisture or rain. No objects
or liquids may penetrate into the camera.