4
AC track power installation using conventional Horn/Bell or DALLEE controller #755
2 1
2 1
2 1
speaker
Track Power input
Red
Red
Gray
White
Black
motor leads
from E-Unit.
M
Use 1.5 amp choke, item 702, as
supplied with sound system or
item 703 for larger motor loads.
Choke
2 rail - connect to right
rail pickup.
3 rail - connect to center
rail pickup.
2 rail - connect to left rail
pickup.
3 rail - connect to
outside rail,
chassis, pickup.
E-Unit
(electronic or
mechanical)
to optional
non-directional
lighting
to optional
directional
lighting
Red
Red
Black
Blue
Brown
E-Unit color codes match item #400. Other
manufacturer's color code will vary. If you have a
series motor, connect the Yellow and Orange wires to
the field as instructed in the E-Unit's instructions.
Sound Board
Power Board
wires with a " " ARE a connection!
wires crossing over (without a " ")
DO NOT CONNECT!
Black
Blue
White
If you do not want the sound system to operate from
the standard Horn/Bell signals, then disconnect the
HB - J4 wire harness.
