Controller (#755) wiring instructions, cont.
Common rail operation with one power source
(wired for the least interference between controllers)
The Controller box connection "U" is NOT CONNECTED as shown.
Standard operation with separate power sources
If using a command control system in conjunction with the LocoMatic™ system the "Power Transformer" would be the output from the command system
that would normally power the track. For those utilizing a DC source, the "Power Transformer" would be your DC power pack cab output.
U
A
U
A
OUT
IN
LocoMatic™ Controller
(top view)
Track: outside (3 rail)
left hand (2 rail)
Track: center (3 rail)
right hand (2 rail)
Power
Transformer
Common rail operation with two separate power sources
Remember to have transformers properly phased!
U
A
U
A
OUT
IN
LocoMatic™ Controller
(top view)
U
A
U
A
OUT
IN
LocoMatic™ Controller
(top view)
Common rail of
layout
(outside - 3r, left - 2r)
Track 2
(ctr - 3 rail or
right rail - 2 rail)
Track 1
(ctr - 3 rail or
right rail - 2 rail)
Power
Transformer
U
A
U
A
OUT
IN
LocoMatic™ Controller
(top view)
Common rail of
layout
(outside - 3r, left - 2r)
Track 1
(ctr - 3 rail or
right rail - 2 rail)
U
A
U
A
OUT
IN
LocoMatic™ Controller
(top view)
Track 2
(ctr - 3 rail or
right rail - 2 rail)
Power
Transformer
Power
Transformer
