17
the four corners of the area to drag the corner of the temperature measurement area to
change the size of the area. The temperature measurement area attribute setting menu has
four items: specific amplitude coefficient, distance setting, local parameter and analysis
setting. Under the analysis setting, there are submenus: maximum temperature, minimum
temperature, average temperature and maximum temperature difference.
If you want to set the temperature measurement object as a "reference object", refer to
"4.8.2 Temperature Measurement Function Settings".
! Note: Only one reference temperature measurement target can be set for the thermal
imager.
3.4.3
Store the image
To store the acquired current image, one of the following two methods can be selected:
Press the store key or click the "Picture" icon on the touch screen
? Select the "Photo"
icon in the menu, and the system will automatically save the image.
Press the store key. After the image is frozen, press this key again to save the image.
3.4.4
Play back the image
Click to select the "Playback" icon on the touch screen
Pop up the picture library,
select the folder or image to be played back, and play back the image
Click to select the image library, and you can edit the image for the second time, record it,
make a report, upload it to the cloud, and delete it.
3.4.5
ExportImage
The card reader can be used to operate the data stored in the TF card, including image
export, deletion, formatting and other operations.
USB data cable can be connected to the computer to operate the data stored in the TF card
of the thermal imager, including image export, deletion, formatting and other operations.
! Note: It is recommended to format the TF card by using the format function in the
thermal imager solidification software.
3.4.6
LCD screen settings
Press the pull-down menu or click the touch screen setting icon to enter the "Settings"
menu.
"System Settings"
"Power saving mode setting"
Under "Brightness
Adjustment", set the LCD brightness.
