C 0.7/0.8 is shielded to prevent magnetic radiation interfering with your TV.
11
English
Setting level
Adjust the volume on your Suite S 1.2 so the bass sound matches the level
from the front speakers. Adjust it so that you can hear the sound contribution
from Suite S 1.2 - but without the bass being too dominant. The bass should
be fi rm and precise, so that the subwoofer provides the bass that is present in
the music/sound track - neither more nor less. When connecting to a surround
sound system it may be an advantage to select a fi xed setting for Suite S 1.2
and only adjust the level via the surround amplifi er’s separate adjustment of
the subwoofer output level. If you over-modulate the subwoofer, your total
sound experience may be disturbed by distortion. Remember that the loca-
tion of Suite S 1.2 has a major effect on the sound pressure you experience.
Choice of crossover frequency (only with connection via
"Line In, Left/Right")
Once the volume level is set you can tackle the equally important adjustment
of the crossover between the front speakers and Suite S 1.2. You do this by
adjusting "Crossover" up and down until you can hear the bass is smooth and
without "holes". You may need to readjust the volume slightly for this adjust-
ment.
Phase setting
Use the trial-and-error method for both settings - and you may also want to
try readjusting volume and crossover frequency. In all cases it is a good idea
to listen to the system for a couple of days and then readjust as required. The
same setting will not always be ideal for both surround and 2-channel stereo.
It is therefore always useful to make a note of your preferred settings for each
application.
The "Auto" function sets Suite S 1.2 to stand-by mode after approximately
15 minutes with no signal to the input terminal. When Suite S 1.2 receives a
signal again, the system will switch on automatically.
The "Power" button is the main switch for the system. It is best to switch the
system off completely when it is not going to be in use for long periods. When
making or changing connections, always shut the system down completely.
Summary of Contents for SUITE
Page 1: ...MANUAL www dali dk ...
