In many cases one Piano Forte in one of the listed setups will provide a
good solution, but the absolute perfect solution is two Piano Fortes in
stereo setup. This solution should be connected in exactly the same way,
but you only connect the left channel to one input terminal on the left
Piano Forte and the right channel to one input terminal on the right Piano
Forte. In other respects, follow the instructions given above - simply with
separate channels. If necessary, obtain advice from your dealer.
Tuning Piano Forte
Once you have chosen the connection you wish to use, you must begin the
task of tuning the system. Following the procedure below will help you to
achieve good results. Use a piece of music that you know well, ideally with
rhythmic bass tone content such as bass drums, electric bass or similar.
Begin by setting "Volume" and "Crossover Frequency" to the central pos-
ition ("12 o'clock"). Set the "Phase" change-over switch to position 180°,
and set both "Auto Shut Off" and "Power" to the "ON" position.
1.
Mains lead
2.
Power, on/off switch
3.
On/off indicator
4.
Auto Shut Off
5.
Speaker level, speaker signal
6.
Line level, Line signal
7.
Volume, volume control
8.
Phase, 0 and 180 phase switch
9.
Crossover Frequency
10. Ventilation grill, DO NOT COVER!
Always switch off Piano Forte before adjusting any of the cables!
8
English
Summary of Contents for speakers
Page 1: ...MANUAL www dali dk...
