LT3-P/LT7-P Thermal Image Camera User Manual
DALI
25
4.3
Auto/Manually
By adjusting the temperature and color corresponding relation, users can
observe enhanced image quality and easily find and analyze thermal fault.
There are two operational modes Auto/Manually available.
Press
Menu
key to activate the main menu and select
Auto/Manually
. The
low-level menu will display the inactive mode followed by a “?”. Pressing the
>
key followed by the
Confirm
key will switch to the displayed mode. Press
A
key to select palette or adjust it manually.
In
Auto
mode, the camera automatically determines the low and high
temperature levels to assign to the lower and upper ends of the palette. In
Manually
mode, the Operator may assign the lower and upper end values to
enhance the image quality by adjusting the temperature to color relationship.
In
Manually
mode p
ressing the
left
or
right
arrow will reduce or
increase the Span and pressing the
up
or
down
arrow will reduce or
increase the Level.
4.4
Setup menu
