9
[1] Switch
Used to turn on and turn off the thermal imager. Press this switch for more than three seconds to
turn on/off the thermal imager.
! Atention
：
It is recommended to wait at least ten seconds after turning off and turning on the
camera again to ensure the safety of the thermal imager.
[2] Selection/Auto key (marked A)
The button marked A has the following three functions.
a)
The first function is to modify the selected parameters. Perform this function by quickly
pressing (less than 2 seconds) and releasing the button to modify the selected parameter. Each time
you press this key to select the next parameter, the selected parameter will be marked in yellow.
2
3
1
4
5
6
7