Dali Kubik, Manual

Page: 17 / 85

17
AppENDIx
Action Status
1 Start process
to enter IR learning mode press and hold the
button directly on the KubIK fRee control panel
or on the KubIK fRee remote control.
All indicator lights on the front of the KubIK fRee will
turn on to show IR learning mode is active.
2 Define function
Press the button directly on the KubIK fRee or on the
KubIK fRee remote that performs the function that
you wish to be transferred to your primary remote
control.
the red indicator light on the front of the KubIK fRee
will turn off when the input is accepted.
3 Define primary remote control button
3.1. Press the button on the primary remote that
you wish to perform the function indicated in
the previous step.
3.2. Press and hold the same button for 5 seconds.
3.3. Press the same button again.
3.1. the indicato lights turns off when input is
accepted.
3.2. the indicator lights turns off when input is
accepted.
3.3. the indicator lights blinks when final input is
accepted.
4 Continue or exit process
to teach other functions
Repeat step 2 and 3 until all the desired
functions have been taught.
to exit IR learning mode
Press and hold the button directly
on the KubIK fRee or on the KubIK fRee
remote, alternatively wait 30 seconds.
5 You are done
It is now possible to control the KubIK fRee from
your primary remote.
If you accidently assign a wrong primary remote control key to a KubIK fRee function, just restart the
learning process for that function to overwrite.