background image

 

13 

4.2

 

 Temperature Measurement Mode 

Add or delete a temperature measurement object, including a temperature 

measurement  point,  temperature  measurement  area,  and  temperature 
measurement line. 

Tap the touch screen. Click the temperature measurement mode icon 

on 

the touch screen, and the following interface appears. 

 

Temperature measurement mode interface 

Click  the  ICONS  of  temperature  measurement  objects  such  as  temperature 

measurement  point,  temperature  measurement  area,  and  temperature 
measurement line on the touch screen to add temperature measurement objects 
such  as  temperature  measurement  point,  temperature  measurement  area,  and 
temperature measurement line on the screen. Click the delete icon 

on the far 

right to clear all the added temperature objects. 

4.3

 

 Color code switching 

This function is used to select the color code of the image display. There are 

six color codes to choose from. 

Click the touch screen to pop up the main menu. Click the color label 

on 

the touch screen to pop up the following interface. 

Summary of Contents for IRTECH C Series

























Reviews: