Dali FAZON MIKRO, Manual

Page: 5 / 18

7
UK DE DK
1.0 INTRODUCTION
congratulations with your new DALI FAZON MIKRO loudspeaker. It is important to us that your
new loudspeaker is set-up and connected optimally. We strongly recommend that you read this
manual and follow its instructions before unpacking and installing the speaker. this manual
contains instructions for set-up and connection, as well as tips and advice on how to get the
most out of your FAZON MIKRO loudspeaker.
DALI is acclaimed around the world for unique loudspeakers developed to meet our
uncompromising standards for design and performance. the goal for every single DALI
loudspeaker is to create a listening experience in your home that will make you forget time
and place.
Remember to sign up for the DALI newsletter at www.dali-speakers.com.
Enjoy.
2.0 UNPACKING
Be careful not to damage the contents when you unpack the parts. check that all parts are
contained in the cardboard box (see table 1). Keep the packaging materials should your speaker
need to be relocated or serviced.
Note:
take care not to scratch the high-gloss finish of the DALI FAZON MIKRO enclosure.
3.0 POSITIONING
Before setting up and connecting your new FAZON MIKRO loudspeakers, you should find the
best possible placement relative to your listening position. It is a good idea to follow these
simple guidelines.
Ideally, the FAZON MIKRO speakers should be placed at the corners of an equilateral triangle
with the (left and right stereo) speakers at a minimum of 1.5 metres (60”) apart to achieve good
stereo separation. Avoid placing objects between the loudspeakers and the listening position
as obstacles can have a detrimental effect on tonal balance. Placing your new FAZON MIKRO
depends on the particular kind of set-up you have in mind:
Figure 1 illustrates the optimal LcR set-up
Figure 2A illustrates the optimal Stereo set-up
Figure 2B illustrates the optimal 5.1 Surround set-up
Figure 2c illustrates the optimal 7.1 Surround set-up
4.0 CONNECTION
Before connecting or disconnecting any cables, always turn off the amplifier to avoid electrical
shock or damage to your equipment.
Ensure the positive terminal on the bracket (marked red) is connected to the positive output
terminal of the amplifier and negative (marked black) to the negative. Incorrect connection will
result in poor stereo imaging and loss of low-frequency output. Always use cables of the same
type and length for left and right channels.
Note:
If you are using FAZON MIKRO in a surround system, follow the instructions included with
your surround amplifier, as even a single loudspeaker connected out-of-phase will make the
bass weaker and the soundstage unfocused.