4
5
Positioning
RS3
AS2
CS4
Positioning
EUPHONIA RS3
The
Euphonia RS3
is suspended on the rear or side wall
using the enclosed fi ttings, which allow horizontal
and vertical angling of the
RS3
. It is important to
angle the tweeter module towards the listening
position to ensure the widest possible frequency
range.
Positioning
EUPHONIA AS2
Adjustment options make it possible to integrate the
AS2
even when it is
located somewhere other than centrally between the two front speakers. The
best location, however, will always be with the
AS2
positioned together with
(under) the
CS4
central speaker, if this is possible.
Positioning
EUPHONIA CS4
Set up the
CS4
on the dedicated base and tilt the speaker front towards the
listening position due to the vertically directional treble sound. Wave-lenghts
are very short in the highest frequency range, and a slightly mis-adjusted angle
can reduce the experience of genuine airiness in the reproduction. Maintain a
minimum distance of 10 cm/4 inch to the back wall so that the bass refl ex ports
on the rear of the unit function optimally.
