Remember that the tone controller is only intended for minor adjustments.
9
English
Important cables
There is one area where you can significantly influence the sound quality
- the cables between amplifier and speaker. This is a case where the rule
'any chain is only as strong as its weakest link' definitely applies. The fine
and detailed signal from the amplifier must be conveyed to the speakers
with minimum loss. The table below shows the maximum length your
cables should be.
DALI recommends using cables of at least 1.0 mm2 in cross section. How-
ever, it is not just the cross section that is crucial to the sound. The actual
structure of the cable and the materials employed can have a great influ-
ence on the sound image. We therefore recommend that you only use
cables manufactured for this purpose. You can purchase DALI Wave cables
from your authorised dealer, who will also be able to advise you on the
best type for your requirements. Here is a cross section of the DALI Wave
cables:
DALI White Wave:
1,5 mm
2
DALI Red Wave:
3,0 mm
2
DALI Silver Wave:
3,0 mm
2
Cable cross section
AWG
Maximum length
1,0 mm
2
1,5 mm
2
2,0 mm
2
3,0 mm
2
12
14
16
18 (17)
15 meter
22 meter
30 meter
45 meter
50 feet
75 feet
100 feet
150 feet
AWG: American Wire Gauge
WAVE
