Dale Power Solutions Ltd
User Manual
…………………………………………………………………………………………………………
17
4. Press
for more than 0.5 s but less than 2 s. OFF stops flashing.
5. Press
or
to display the output voltage you require. The voltages provided are 208 V, 220 V,
230 V (the default value) and 240 V.
6. Press
for more than 0.5 s but less than 2 s. The voltage stops flashing.
7. Press
for more than 2 s.
Checking parameters
To check the UPS parameters:
■ Press
or
to display the parameter you wish to check. If you press
for more than 2 s the
UPS cycles through the parameters three times automatically Examples are shown below.
Output
Load
Temperature
Input
Battery