MINI 1CV CASAMBI
PRELIMINARY
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI)
–
Italy
Via Lago di Garda, 22
Tel. +39 0444 1836680
–
Rev.
09/08/2022 -
Pag.
5/8
LOCAL COMMANDS FUNCTIONALITY
N.O.
P
USH
B
UTTON
6
N° Push Button
Functions
1
Controls a luminaire
Click
Long press (>1s)
Tap to turn a luminaire on or off
–
hold to adjust luminaire brightness
Controls an element
Click
Long press (>1s)
Tap to turn a device element on or off
–
hold to adjust the element value
Control a group
Click
Long press (>1s)
Tap to turn a group on or off
–
hold
to adjust brightness
Control scene
Click
Long press (>1s)
Tap to turn a scene on or off
–
hold
to adjust scene brightness
Control all luminaires
Click
Long press (>1s)
Tap to turn all luminaires on or off
–
hold to adjust brightness
Cycles scenes
Click
Long press (>1s)
Tap to cycle through the list of
scenes
–
hold to adjust current
scene brightness
Active/Standby
Click
Long press (>1s)
Tap to switch between two scenes
–
hold to adjust current scene
brightness
For all other functions, please refer to the CASAMBI APP document at:
https://support.casambi.com/support/home
UNPAIR DEVICE FROM THE CASAMBI NETWORK
If the device is associated with a network to which you do not have the credentials and you want to associate it with a new one,
follow the settings specified in the Casambi APP in the "Nearby Devices" section. Once you have selected the unpair function and
started the procedure, turn off the main power of the power supply connected to the MINI-1CV-CASAMBI and turn it on again after
1 - 2 seconds.
If the main power supply is switched off and on again quickly, unpair may not be done properly. Repeat the unpair sequence by
allowing 1 or 2 more seconds to elapse between the moment you turn off and re-turn on the main power of the power supply
7
.
In case it is difficult to unpair, it is possible to associate a button N.O. to the input "INPUT" of the MINI-1CV-CASAMBI and press
it during the unpair procedure.
POSITIONING Tc POINT
Bottom side, under the LED output connector.
6
By default, the N.
O. Push button is set as “Control a luminaire” and controls the output of the MINI
-1CV-CASAMBI.
7
The discharge time of the power supply secondary depends on the construction characteristics of the power supply used.
