DGM02
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI)
–
Italy
Via Lago di Garda, 22
Tel. +39 0444 1836680
–
Rev.
06/12/2022 -
Pag.
4/32
ONBOARD LED
LED
FUNCTION
ON
BLINK
OFF
LED1
(First from left)
Ethernet
Wired and
communicating via
ethernet
Wired with ethernet
Not wired
LED2
BUS1(RTU/ DMX)
Connected with
communication
Connected with no
communication (only
RTU)
BUS1 not enabled
LED3
BUS2(DMX/RTU)
Connected with
communication
Connected with no
communication (only
RTU)
BUS2 not enabled
LED4
(First from right)
BUS DALI
Connected with
communication
Connected with no
communication
DALI BUS not enabled. BUS
power off
RESET BUTTON
Device Restart: Press the reset button for less than 2 seconds.
Factory settings: Press the reset button for more than 2 seconds, all 4 signaling LEDs must light up progressively from right to
left.
POWER OVER ETHERNET (POE)
The device is able to operate also with PoE power supply.
To enable this power supply, simply move the PoE selector upwards.
PoE On
PoE Off (factory setting)
NOTE: Before connecting the device to a PoE switch or injector, disconnect any other power sources from the DC IN + and DC IN-
terminals.
