ROLLOMAXIMUM XL
Page 11
Description of the machine
Construction
The ROLLOMAXIMUM XL is a robust, multifunctional agricultural implement with the following
features:
•
The machine consists of 5 different working implements. At the front there is a parallel-
mounted hydraulically adjustable crackerboard, followed by a Ø53/Ø48 cm cross-kill
roller. This in turn is followed by a harrow with four rows of hydraulically adjustable
tines. The maximum harrow depth is adjusted mechanically by a "hydro-clip" on the hy-
draulic lift, but the entire harrow section is hydraulically raised off the ground, for ex-
ample when turning at headlands. The surface is levelled again by a spring-mounted
mechanically adjustable levelling board. Finally the ground is compacted with a row of
Ø50/Ø45 cm cross-kill rings.
•
The side sections are fitted with a hydraulic weight transfer system, which is designed
to transfer some of the weight from the machine centre section to the side wings, in or-
der to ensure uniform tilling of the ground across the full width of the machine.
•
For optimum protection of the machine's core components, all assemblies are mounted
on spring mechanisms.
ROLLOMAXIMUM XL is designed to receive the following optional extras:
•
The machine can be optionally fitted with track looseners for tractor rear wheel widths
of up to 4.5 metres. In addition, the cross-kill rings can be replaced with a Ø50 cm front
roller cage and a Ø45 cm back roller cage.
