DALBO MAXICUT 260 Series, Manual

Page: 22 / 32

MAXICUT
Page 22
Maintenance
Good maintenance ensures a long life for the MAXICUT and therefore optimal use of the
machine. Grease fittings have therefore been mounted in places where wear is
greatest.
All screw connections must be tightened after the first day of work. Cotter pins and
bolts should be checked to avoid breakdowns. The hydraulic system should also be
checked to ensure it is air-tight.
Lubrication
Fig. 8
Lubrication points Number
of nuts
Lubrication
interval hours
Images
Pull 3 8 A
Wheel frame with cylinders 4 8 B
Pipe stabiliser for the outrigger beam 2 8 C
Mobile frame 2 8 D
Bearings 4 50 E
Wheel bearings 2 200 F
All lubrication points should be greased at least once a year.
A
A
B
B
B
C
D
E
F