LEVELFLEX
Side 24
4.
Mount the sleeve shoe (pos. 2) and then screw on the locking nut and lock it
with Loctite. Make sure that the thread is completely clean and free of oil and
dirt before using Loctite. After using Loctite do not fill with oil before 12 hours
hereafter.
5.
Lubricate the sleeve of the sleeve shoe (pos. 2) as well as the inside of the cyl-
inder tube with oil and then slide the piston into a middle position.
6.
Screw on the top piece and tighten it.
7.
Mount the cylinder. Use self-tightening nuts and avoid tightening the nuts too
hard. The cylinder eye must be able to turn around freely in the fork.
8.
Mount the tubes. Make sure that the tubes are not exposed to any squeezing
and that the connections are tight.
