DALBO FARMERDISC 300, Manual, Page: 18 / 24

FARMERDISC
Side 18
Hydraulic System
Inspect all hydraulic hoses for chafing or leaks. Check hoses for
pinching.
 To avoid rust, any projecting piston rods should be coated with oil or
grease, if the FARMERDISC is to be parked for a long period of time.
Remember to remove the oil or grease prior to operation.
Disc Hubs
Tighten the disc hubs once a year or as needed.
Fig. 7
1. Unscrew the nub cap.
2. Release the castle nut in the
nub housing. Only pound out-
wards by the milled tracks.
3. Tighten the nut ¼ turn or until
there is no play in the hub.
4. Reengage the castle nut in the
milled tracks.