COMBIFLEX
Page 21
Adjustments
Wheels
The wheel bearings must be lubricated and adjusted once a year. Similarly, the cor-
rect tyre pressure must also be ensured (see recommended pressure on the tyre).
Adjustments and lubrication of wheel bearings
1.
The hub cap is removed.
2.
The cotter is removed.
3.
The castellated nut is tightened by 1/6 of a rotation so that the hole is in line
with the shaft. The wheel is spun around and there should be no resistance. On-
ly a little bit of slack should be felt in the hub housing when the wheel is moved
from side to side. If there is too much slack, repeat the process.
4.
The cotter is installed
5.
The hub cap is filled ¾ with grease and fitted.
Hydraulics
All hydraulic hoses must be checked for wear or damage. Ensure the hoses are not
subjected to any crushing.
When parking for longer periods, any protruding piston rods should be lubricated
with oil or pressure grease in order to avoid rust forming on the piston rods. Re-
member to remove it again before use.
Summary of Contents for COMBIFLEX
Page 1: ...COMBIFLEX EN 300 cm Series no 00100 XXXX...
Page 2: ......
Page 29: ...COMBIFLEX Page 29 Spare parts...