background image

        

 

Speed button: 

- Firstly push speed button, the wing speed is in the medium level 
- Secondly push speed button, the wind speed is in the high level 
- Thirdly push speed button, the wind speed returns to the low level. 

 
Mode button: 

- Natural mode 

 Sleep mode 

 Normal mode 

Natural  mode  :  The  wind  imitate  the  blow  of  natural  wind  based  on  strong 
and soft wind. 
Sleep mode: the first half hour after running as strong and 
soft natural wind, it becomes med natural wind and the 
second half hour it changes to soft natural wind until the end of preset time. 
Normal mode: The wind blow based on Low/Med/High speed. 

 
Mist function: 

- Mist function can be used separately, or worked together with the fan. 
- Firstly push Mist button, the mist spray in low volume. 
Secondly push Mist button, the mist spray in medium volume. 
- Thirdly push Mist button, the mist spray in high volume. 
- Note: While the mist function work normally, the indicator light on the body 
shell is blue, while the water is lacking, the indicator light is red. 
plus or minus pole. 
 
 

Oscillation function: 

-  The  oscillation  function  makes  it  possible  to  direct  the  flow  from  the 
apparatus so that it automatically alternates 
over a range of 75

º

 

- To activate this function, push the OSC button. The yellow light of OSC on . 
- Press it again to stop oscillation, yellow light of Osc  off. Ionic function: 
- Mist function can be used separately, or worked together with the fan. 
-  The  appliance  can  generate  negative  ions  generated  by  the  ionizer 
emanate  from  the  unit  throughout  the  room  and  cause  dust,  pollen,  pet 
dander etc to clump together and drop out of the air. 
- Push the ion button, green light of Ion function on, 
- Push it again to stop working, the green light of Ion function off. 
 
 
 

Mosquito repellent function 

-  Mosquito  repellent  function  can  be  used  separately,  or  worked  together 
with the fan. 
- Put the mosquito repellent tablet (not included with the product) into its hole 
on the body rear shell. 
-  Push  Mosquito  button  red  light  of  mosquito  repellent  on,  to  avoid  the 
mosquitoes annoy. 
- Push it again to stop working, red light of mosquito repellent off. 

Note: 

Summary of Contents for MISTY 40









Reviews: