
MaxiCut
Side 13
Connecting and disconnecting
Connecting
Fig.2
MaxiCut is attached to the tractor's
lifting arms and secured using
balls and split pins (A). The sup-
port leg (B) is raised and secured
by a pin (C). MaxiCut 200/300
coupled so that the drum section,
always preferred to in paragraph
(D).
Remember to secure drawbar with balls and split pins.
Hydraulics
MaxiCut requires a double-acting hydraulic outlet, in which one line is used
for lowering the side sections and other for towing the frame to transport the
roller from field to field.
Table 1. Hose markings
Cylinder name
Colour Outlet
Function
Wheel
frame cylinder
Yellow Double acting
Raises MaxiCut up onto its
wheels and down into work-
ing position.
Extend/retract Red Double
acting Retracts the sides up-
wards/downwards.
L
Check hydraulic hoses for crimping
Disconnection
Fit support leg vertically, release drawbar from tractor and disconnect hydrau-
lic hoses.
A
B
C
D
Summary of Contents for MaxiCut 200
