Daktronics VIP 4500, Operator'S Manual, Page: 31 / 67

Advanced Operation 27
4. Reload the configuration settings at this time.
5. If settings are in a Venus 7000 script file or command
frame, run that file now; if not proceed to
Step 7
.
6.
If there are .VLC files for each VIP channel, follow these
steps:
a. On the Venus 7000 shell, click the VLink button in
the bottom right corner. Refer to
Figure 20
.
b.
Select the sign connected to the VIP located in the
Sign window. Refer to Figure 21 .
c. Confirm the channel is set to VLink Channel 1 and
click the Details button on the lower left. Refer to
Figure 22 .
d. Click the Send Configuration Settings button on
the bottom left. Refer to Figure 23 .
e. Browse to the location of the .VLC files and load the
configuration for Channel 1 by selecting a file and
clicking
Open
. Refer to
Figure 24
.
f. VLink Configuration window will appear.
Click OK . Refer to Figure 25 .
g. Repeat the previous step for Channels 2
through 4.
Note: If no functional configuration backup is
available, the configuration will need to be re-
entered manually.
Figure 20: Venus 7000 Shell
Figure 21: Selecting Sign
Figure 22: Details
Figure 23: Sending Configuration Settings Figure 24: Loading Configuration
Figure 25: VLink
Configuration Window