Mechanical Installation
11
Section 3:
Mechanical Installation
3.1 Display Lifting
The top of the display is equipped with several
5
/
8
" eyebolts for lifting the display. Lift the
display using a lifting bar. Use every eyebolt, and maintain a 90° lifting angle as shown in
. The eyebolts may fail if this is not done.
The eyebolts are designed to carry only the weight of the display cabinet. Do not lift the
mounting structure or other additional weight. Do not permanently support the display with
the eyebolts. Contact Daktronics with additional questions about display lifting.
3.2 Display Mounting
Securely mount each display to a suitable mounting structure provided by others. Daktronics
attached aluminum Z-extrusions to the back of the display for mounting. Use all Z-extrusions
when mounting the display.
Use appropriate hardware to support the weight of the display. Have a qualified engineer
inspect the mounting structure.
Note:
Daktronics is not responsible for mounting methods or the structural integrity of
support structures provided by others.
Figure 5: Correctly Lifting the Display