Daktronics TI-2022, Display Manual

Page: 9 / 32

Mechanical Installation
5
Tripod Mounting
Mounting the display to a tripod requires the optional tripod mounting kit (Daktronics part
# 0A-1153-0325). A camera tripod is not sturdy enough to safely support the display and
will not attach to the display or adapter plate. An appropriate “speaker stand” tripod is
available from Daktronics (part # A-1580).
Refer to
Figure 5 for instructions on preparing the display for mounting:
1. Remove rubber bumpers
from bottom of display.
2. Push in and discard 2
bottom knockouts.
3. Attach tripod adapter plate
using bumpers and screws.
4. Install knob, nut, and washer
on the tripod adaptor.
5.
Attach tripod bracket to adaptor
plate using O-rings and T-bolts.
Bumper (HE-1080)
Tripod Adaptor Plate
(0S-1153-0036)
Screw (HC-1489)
Bumper (HE-1080)
Screw (HC-1489)
Tripod Bracket
(HS-1306)
T-bolt
(HS-1315)
Washer
Knob
O-ring
Nut
Figure 5: Tripod Mounting Kit Installation