Daktronics SQ-2001, Display Manual

Page: 12 / 38

Exceeding load angles or weight limits could cause the
bolts in the scoreboard cabinet to buckle, resulting in
serious damage to the scoreboard or injury to personnel.
Also, loads should be applied directly in the plane of the
eyebolt as shown in
Figure 5 .
Note: Daktronics assumes no liability for damages
resulting from incorrect setup or lifting methods.
Eyebolts are used to suspend the scoreboard while it
is being installed and may be used, with additional
hardware in a permanent, suspended installation.
1. Use the eyebolts at the top of the scoreboard frame to lift the display into position for
mounting.
2. Secure the display to the wall by attaching mounting hardware through all holes on the
side rear flanges of the display to a pre-drilled hole in the wall (
Figure 6 ).
Due to the variety of wall materials used in sports facilities, Daktronics cannot anticipate a
user‟s individual installation needs or provide mounting hardware suitable for every
installation. Choose a method of installation that will safely support the weight of the display.
Daktronics makes optional protective devices, including screens and netting, to help prevent
damage to the scoreboard due to normal ball impacts.
Note: Some users install devices to protect the scoreboard from projectiles. Scoreboard
protection devices not provided by Daktronics must be approved by Daktronics prior to
installation. Failure to follow this approval procedure will void the scoreboard warranty.
Figure 5: Eyebolt Plane Load
Figure 6: Wall Mounting