Daktronics SPORTSOUND SSR-100 GEN II Quick Start Manual Download Page 3

Page: 3 / 4

Sportsound SSR-100 Gen II Quick Start Guide

DD3687811
Rev 01
27 September 2018

201 Daktronics Drive

Brookings, SD 57006-5128

www.daktronics.com/support

800.325.8766

Page 3 of 4

Denon DN-306X

Basic instructions are described below. For more information about

mixer operation, refer to the

Denon DN-306X User Guide

•

Ensure all source equipment is turned on and operational.

•

For each channel (input source) in use, verify the green

SIG

LED is

illuminated.

• Adjust the

MASTER

volume level to achieve the final output. If the

red

CLIP

LED is illuminated, decrease the level.

Surge Protector

The power strip features a 15A breaker. If the breaker trips, press

the small button next to the power switch to reset it. The green

POWER ON

LED and the red

SURGE PROTECTED

LED should both be

illuminated when the rack is plugged into a functioning outlet and

powered on.

Summary of Contents for SPORTSOUND SSR-100 GEN II

Page 1: ...ack as a strain relief for the power cord 2 Connect the 15 4 6 m XLR cable from MIC 1 AUX 1 on the announcer s interface to the MIC 1 AUX 1 OUT jacks on the front of the rack Also plug the wallpack tr...

Page 2: ...ustment PROLONGED OVERLOAD OUTPUT SIGNAL WILL DAMAGE THE AUDIO SYSTEM Rane MLM82S Basic instructions are described below For more information about mixer operation refer to the Rane MLM82S Operators M...

Page 3: ...source equipment is turned on and operational For each channel input source in use verify the green SIG LED is illuminated Adjust the MASTER volume level to achieve the final output If the red CLIP L...

Page 4: ...ter twice to deploy channels to other receivers Note Perform a scan on all of the wireless units just minutes before the game If a scan is performed too far ahead of time frequencies set up by the med...