Daktronics RC-200 Operation Manual Download Page 13

Page: 13 / 80

RC-200 Handheld Controller

Connect Mode

Connect mode (

Figure 9

) is used when the wireless

handheld is connected to a wireless server Base

Station. In Connect mode, the wireless Base Station

determines the operation of the handheld, and

all operation is specific to the wireless Base Station

Function selected.

Switching to Connect Mode

After all initialization and configuration is complete, the wireless handheld controller will

be ready to connect to a wireless Base Station.

Display

Action

INITIALIZING
RADIO

CONNECTING VIA
B: XX C: YY

XX = Broadcast Group #

YY = Channel #

Press

<CONNECT>

to create a connection to an available

wireless Base Station on the broadcast group and channel

numbers shown.

Note:

The Wireless Base Station must be powered on and must

be set to the specified broadcast group and channel.

• If a connection was made, the wireless handheld will be

operating in Connect mode. Refer to the application-

specific sections for operation details.

• If a connection could not be made, refer to

Section 17:

Troubleshooting (p�36)

for information about how to

resolve the problem.

Signal Strength Indicator

Once a connection has been made, the top line of the LCD

will show the signal strength (

Figure 10

). This indicator shows the

approximate signal strength of the network connection. Each

successive bar indicates an additional level of signal strength

between the handheld and Base Station.
When no bars or 1 bar is visible, the connection to the wireless network is likely to be

limited, and the console may occasionally fail to respond. To improve signal strength,

move within range of the Base Station, and remove any obstacles located between the

Base Station and handheld controller if possible. For more information, refer to

Section 2:

RC-200 System Overview (p�4)

Figure 9:

Connect Mode LCD Icon

Figure 10:

Signal Strength

Summary of Contents for RC-200

















































































Search results

Summary of Contents for RC-200

Reviews:

Related manuals for RC-200

Brands by name

Popular brands

Daktronics RC-200, Operation Manual

Search results

Summary of Contents for RC-200

Reviews:

Related manuals for RC-200

Brands by name

Popular brands