Daktronics OMNISPORT 2000, Operation Manual

Page: 73 / 182

Diving Mode Operation, Menus, & Settings
63
The three LCDs on the OmniSport 2000 keep the operator informed during the event:
DIVER# 01
ROUND:01 RANK:--
The left LCD shows the diver number, round, and diver rank. The middle LCD displays the
current diver’s dive type, position, degree of difficulty, and total score for that round. The
right LCD shows the selected dive order and the event number.
Diving Keys
When looking at the keys on the Diving insert (LL-2566), notice that some of them have
been grouped together by location and others have been grouped with a border. The
keys with borders are used together or perform similar operations, as described in the
following sections.
Judges’ Score Keys
The numbers along the top of the insert are the scoring keys. These keys contain numbers
ranging from zero to ten at half-point intervals (0, 0.5, 1, 1.5, etc.). The keys with borders
are used to enter the judges’ scores. The console then calculates the awarded score
using the formula selected and the degree of difficulty.
Note: Do not confuse the scoring keys with the permanent number keypad at the right
side of the console. The number keypad is used to enter all editable information
such as menu selections, round, and diver edits. The scoring keys are only used to
enter scores.
Round Key
The diving program in the console scores up to 13 rounds. To view which round the
console is currently scoring, look at the second line of the left LCD. To change the current
round, press [ROUND •] then use [0]–[9]>[ENTER] to input the desired round number.
Pressing [←][→] is another method to increment or decrement the current round number.
Diver Key
The diving program in the console manages up to 25 divers per event. To view which
diver is the current diver, look at the first line of the left LCD. To change the current diver,
press [DIVER •] then use [0]–[9]>[ENTER] to input the diver’s number.
Pressing [↑][↓] is another method to increment or decrement the current diver number.
Current Total
Judges scores and round scores are not stored in the console. Each diver has a current
total score, the cumulative score of all rounds for that diver. To change the cumulative
score, press [CURRENT TOTAL •] then use [0]–[9]>[ENTER] to input the correct value.
When to use this:
• If the total score in the console is different than the actual total because the console
has an incorrect DD or judge’s score.
Note: This is the only way to edit the total score. If the operator returned to the diver
with the incorrect total score and reentered the information, those points will be
added onto the current total score. The console does not automatically remove
the incorrect score.
EVNT: 2
DIVE ORDER-A
DIVE 105B DD2.6
TOTAL: 0.00