Daktronics OMNISPORT 2000, Operation Manual

Page: 32 / 182

General Console Features & Operation
22
To update the OmniSport 2000 timer:
1�
Connect the 9-pin serial cable
from the COM port of the
computer to the J4 EXPANSION
PORT on the console, and then
power on the console.
2� Open an Internet browser and
go to: http://dakfiles.daktronics.
com/downloads/Sports_Products/
OmniSport%202000/Timer/
DakLoader2.exe
A prompt will appear on asking
to Run or Save the program. Click
Run (twice if necessary). The
DakLoader2 program should open
( Figure 36 ).
3� Go to File > Hex Files and click
Download Latest Hex Files
( Figure 37 ).
4� Click Communications and select the COM port that the 9-pin serial cable is currently
connected to.
5� On the main screen, click Aquatics , and then click Update .
6� Turn the OmniSport 2000 console OFF and then back ON. After cycling power, the
console should automatically begin programming the hex file selected.
Note: To review DakLoader2 Instructions, go to About > Help using DakLoader2 .
To confirm system status or for more information from Daktronics, go to
About > About DakLoader2 .
Figure 36: DakLoader2
Figure 37: Download Latest Hex Files