Daktronics OMNISPORT 2000, Operation Manual

Page: 117 / 182

Water Polo Mode Operation, Menus, & Settings
107
In-Game Operations
The functions during a match should be available through one of the keys on the
keypad. Thoroughly review Water Polo Keys (p.103) .
Enable/Disable Penalty Timer Keys
Press [ENABLE PENALTY TIMER] and [DISABLE PENALTY TIMER] to enable or disable the
penalty times, respectively.
Period Keys
To increment the period, press [1] . To edit the period directly, press [PERIOD •] ,
use the number pad to enter the correct value, and then press [ENTER] .
Time Out ON/OFF
The [TIME OUT ON/OFF] key toggles the timeout clock. If the timeout clock is on, it will turn
it off; if it is off, it will allow for selection of a full or partial timeout without it being assigned
to either team. Each press of the key will select the next type available. Press [ENTER] to
start the type shown on the LCD.
Menu Navigation
Press [MENU] to access the Main Menu screen. The water
polo mode has four menus, described in following sections.
The operator may navigate through the menus using the
arrow keys or by pressing the number that precedes the
menu title. To return to the main menu at any time, press [MENU] twice.
• Use [↑][↓] to scroll through the menus. When a selection is made, press [ENTER] to
accept the menu displayed on the right LCD. Pressing an arrow is equivalent to using
a number when in menu mode.
• The second method uses numbers to go directly to a desired menu choice. Using
the [1]–[9] keys, enter the number sequence as shown on the OmniSport 2000 Timing
Console Quick Reference Guide (ED-13584) . Daktronics provides a laminated
copy of the quick reference guide; keep it next to the console during a meet for
convenience.
Each operator will find his/her own method that works best. Remember that when using
either navigation method, pressing [CLEAR] at any time will go back to the previous
function or menu. Pressing the [YES] and [NO] keys is the same as [ENTER] and [CLEAR] .
Note: In this manual, LCD illustrations aligned to the right indicate menu location while
the set-up actions are shown on the screens to the left. Each step is illustrated as
the console’s right LCD prompts. The keystrokes to get to the menu shown are
indicated below that menu.
Scoreboard Menu
In the Scoreboard Menu , the operator can turn the
scoreboard output ON or OFF, set the dimming (brightness)
level for Multi-drop displays, and display Time-of-Day on the
scoreboard.
MENU-MAIN
1-SCBD MENU
Main Menu Screen
MENU-SCOREBOARD
1-SCBD ON/OFF
From Main Menu – [1] or [ENTER]