Daktronics OMNISPORT 2000, Operation Manual

Page: 113 / 182

Water Polo Mode Operation, Menus, & Settings
103
10 Water Polo Mode Operation, Menus, & Settings
Reference Drawings:
Insert; LL-2569, Water Polo, Omni2000 .............................................................. DWG-182350
The sport insert drawing is located in Appendix B: Sport Inserts (p.151) . If an insert is lost
or damaged, a copy of the insert drawing may be used until a replacement is ordered.
Refer to
Section 3: General Console Features & Operation (p.17) for information on how
to start up the timer and use the sport insert.
General Features
The water polo mode of the OmniSport 2000 timer will perform timing and scoring
operations for water polo events. It can store period, shot, timeout, and penalty times as
well as each team’s scores.
Getting Started
When starting the OmniSport 2000 console, set the console
to the water polo mode. Refer to Startup (p.19) and press
[ENTER] when the right LCD shows 4-WATER POLO .
The three LCDs on the OmniSport 2000 keep the operator informed during the event:
1 2 3 4 5 6 7 8 9 10
HOME TOL PL # P1
3 2 4 1 18
The left and middle LCDs show the home and guest team information, respectively. Both
teams’ LCDs display the same information for each team. The first area under HOME or
GST shows the score. The number under TOL shows the number of time outs left. PL shows
the player’s number who has the penalty. The # shows the number of penalties that
player has; the final area shows the amount of time remaining in the penalty.
The caption above the penalty time remaining ( P1 in this example) shows which of the
three available penalties is currently being viewed. Up to three players’ penalties can be
entered. Press [↑] , [↓] , [→] , or [←] to cycle through the penalties to select the desired one.
The scoring system may be configured to display all three penalties for both teams at the
same time.
The right LCD displays the game time, shot time, and period. The
h after the game time
designates that the automatic horn has been enabled. TIME will change to REST when in
a rest period.
Water Polo Keys
When looking at the keys on the Water Polo insert (LL-2566), notice that some of them
have been grouped together by location and others have been grouped with a border.
The keys with borders are used together or perform similar operations, as described in the
following sections.
Auto Horn
With Auto Horn enabled and the game clock reaches zero, the OmniSport 2000 console
will signal the horn to sound. Press [AUTO HORN •] followed by [ENTER] to enable or
[CLEAR] to disable. An “h” will display in the upper-right corner of the right LCD when
Auto Horn is enabled.
SELECT SPORT
3-PACE CLOCK
GST TOL PL # P1
0 3
TIME 01:59 H
SHOT 35 PERIOD 1