Daktronics LTS-BB, Display Manual

Page: 19 / 34

J31 J32 J21 J22
-OPEN THE LED LIGHT STRIP CONTROLLER AND REMOVE THE ADDRESS PLUG (P19). THIS IS A 12 PIN
PLUG WITH ON LOOP OF BROWN WIRE GOING FROM PIN 1 TO 2 ON THE PLUG.
-MOUNT CONTROLLER TO BACK OF THE SHOT CLOCK OR NEARBY ON THE BACKBOARD STRUCTURE
USING THE BRACKETS AND HARDWARE SUPPLIED.
-MOVE SIGNAL CONNECTION ORIGINALLY GOING TO THE SHOT CLOCK TO J31 ON THE LED LIGHT STRIP
CONTROLLER. USE THE 10'
1
4
" PHONE CABLE (W-1340) SUPPLIED WITH THE KIT TO CONNECT FROM J32
ON THE LED LIGHT STRIP CONTROLLER TO THE SHOT CLOCK SIGNAL INPUT.
-CONNECT TO THE LED LIGHT STRIP BY CONNECTING THE 3 PIN XLR TO 3 PIN XLR CABLE INCLUDED IN
THE KIT TO J21 ON THE LED LIGHT STRIP CONTROLLER. CONNECT THE OTHER END TO THE 3 PIN XLR
ON THE LED LIGHT STRIP.
EXISTING 1/4" PHONE CABLE
XLR CABLE (0A-1230-0090)
W-1340
W-1340, WITH KIT
EXISTING 1/4" PHONE CABLE
J22 J21 J32 J31
-MOUNT CONTROLLER TO BACK OF THE SHOT CLOCK OR CLOSE
NEARBY ON THE BACKBOARD STRUCTURE USING THE BRACKETS AND
HARDWARE SUPPLIED.
-MOVE SIGNAL CONNECTION ORIGINALLY GOING TO THE SHOT CLOCK
TO J31 ON THE LED LIGHT STRIP CONTROLLER. USE THE 10' 1
4
" PHONE
CABLE (W-1340) SUPPLIED WITH THE KIT TO CONNECT FROM J32 ON
THE LED LIGHT STRIP CONTROLLER TO THE SHOT CLOCK SIGNAL
INPUT.
-CONNECT TO THE LED LIGHT STRIP BY CONNECTING THE 3 PIN XLR TO
3 PIN XLR CABLE INCLUDED IN THE KIT TO J21 ON THE LED LIGHT STRIP
CONTROLLER. CONNECT THE OTHER END TO THE 3 PIN XLR ON THE
LED LIGHT STRIP.
-MOUNT CONTROLLER TO BACK OF THE SHOT CLOCK OR CLOSE NEARBY ON THE
BACKBOARD STRUCTURE USING THE BRACKETS AND HARDWARE SUPPLIED.
-CONNECT POWER CORD ON LIGHT STRIP CONTROLLER TO THE 120V SWITCHED
OUTPUT ON THE SHOT CLOCK. THIS IS WHERE THE RED, INCANDESCENT END OF
PERIOD LIGHT WOULD NORMALLY BE CONNECTED.
-CONNECT TO THE LED LIGHT STRIP BY CONNECTING THE 3 PIN XLR TO 3 PIN XLR
CABLE INCLUDED IN THE KIT TO J21 ON THE LED LIGHT STRIP CONTROLLER.
CONNECT THE OTHER END TO THE 3 PIN XLR ON THE LED LIGHT STRIP.
J21 J22
XLR CABLE (0A-1230-0090)
-CONNECT TO THE LED LIGHT STRIP BY CONNECTING THE 3 PIN XLR TO 3
PIN XLR CABLE TO THE XLR JACK ON THE SHOT CLOCK. CONNECT THE
OTHER END TO THE 3 PIN XLR ON THE LED LIGHT STRIP.
SETUP FOR OLDER DAKTRONICS GAME/SHOT CLOCKS,
WITHOUT BUILT-IN LIGHT STRIP CONTROL
XLR CABLE (0A-1230-0090)
J22 J21 J32 J31
-MOUNT CONTROLLER TO BACK OF THE SHOT CLOCK, SCOREBOARD
OR NEARBY ON THE BACKBOARD STRUCTURE USING THE BRACKETS
AND HARDWARE SUPPLIED.
-INSTALL WIRING FROM ALLSPORT CONSOLE OUTPUT (OR
SCOREBOARD), AND WIRING TO LOCAL SCOREBOARD (OPTIONAL).
-CONNECT TO THE LED LIGHT STRIP BY CONNECTING THE 3 PIN XLR TO
3 PIN XLR CABLE INCLUDED IN THE KIT TO J21 ON THE LED LIGHT STRIP
CONTROLLER. CONNECT THE OTHER END TO THE 3 PIN XLR ON THE
LED LIGHT STRIP.
SETUP FOR DIRECT CONNECTION FROM LOCAL
SCOREBOARD OR ALLSPORT CONSOLE.
ALLSPORT 5000 SERIES CONSOLE CONNECTION TO BACKBOARD LED LIGHT STRIP
0A-1230-0233 KIT (120VAC) OR 0A-1230-0234 (240VAC), INCLUDES ONE (1) CONTROLLER AND CABLES.
OTHER DAKTRONICS CONTROL SYSTEMS, AND NON-DAKTRONICS SYSTEMS.
0A-1230-0115 SWITCHED 120VAC KIT, INCLUDES ONE (1) CONTROLLER AND CABLES.
DAKTRONICS SHOT CLOCKS WITH 3 PIN XLR CONNECTOR
ORDER STANDARD CABLE BELOW WITH LIGHT STRIP CHOICE.
ALLSPORT 4000 SERIES OR PROSPORT 6000 WITH SMART CLOCK CONSOLE CONNECTION TO BACKBOARD LED LIGHT STRIP
0A-1230-0091 KIT (120VAC) OR 0A-1230-0181 (240VAC), INCLUDES ONE (1) CONTROLLER AND CABLES.
XLR CABLE (0A-1230-0090)
ALLSPORT 5500 MCP/ COLOR SMART LIGHT STRIP
0A-1389-0106 KIT (120VAC) INCLUDES ONE (1) CONTROLLER AND
CABLES.
SAME SETUP CHOICES AS ALLSPORT 5000 DETAIL.
ONLY DIFFERENCE IS THE 0A-1389-0081
CONTROLLER PART NUMBER. (120VAC ONLY)
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2012 DAKTRONICS, INC.
DO NOT SCALE DRAWING
DAKTRONICS, INC.
BROOKINGS, SD 57006
BH
TYPE
SCALE:
PROJ:
TITLE:
DESIGN:
DRAWN: DATE:
FUNC SHEET SIZE JOB NO: REV
CONNECTION DETAILS: LED LIGHT STRIP CONTROLLER
CBRECZI 09 JUL 03
P1237 R 01 B
1=1
CBRECZI
191995
03
DATE: REV BY:
02 31 MAY 12
KZB
UPDATED LAYOUT, BORDER, AND SETUP FOR
DIRECT CONNECTION FROM LOCAL SCOREBOARD OR ALLSPORT
DATE: REV BY:
01 26 FEB 10
MWM
UPDATE TOP LEFT DETAIL TO SHOW CONTROL
DIRECT FROM ALLSPORT OR SCBD
TO BACKBOARD
LED LIGHT STRIP
LED LIGHT STRIP
CONTROLLER
0A-1230-0230 OR
0A-1230-0231
TO EXISTING SHOT
CLOCK SIGNAL INPUT
FROM CONSOLE;
ORIGINALLY CONNECTED
SHOT CLOCK
DAKTRONICS SHOT CLOCK
WITH XLR CONNECTOR
TO BACKBOARD
LED LIGHT STRIP
120VAC @ 100W
OR 240VAC @
100W
TO BACKBOARD
LED LIGHT STRIP
TO EXISTING SHOT
CLOCK SIGNAL INPUT
FROM CONSOLE;
ORIGINALLY CONNECTED
SHOT CLOCK
TO BACKBOARD
LED LIGHT STRIP
LED LIGHT STRIP
CONTROLLER
0A-1230-0112
TO SWITCHED 120V
OUTPUT ON SHOT
CLOCK 120VAC @
100W
120VAC @ 100W OR
240VAC @ 100W
LED LIGHT STRIP
CONTROLLER
0A-1230-0088 OR
0A-1230-0180
LED LIGHT STRIP
CONTROLLER
0A-1230-0230 OR
0A-1230-0231
TO SCOREBOARD
(OPTIONAL)
FROM SCOREBOARD
(OR CONSOLE)
1/4" PHONE CABLE
1/4" PHONE CABLE
OR 200FT MAX DISTANCE W/ 2 COND 18 AWG
XLR CABLE (0A-1230-0090)
TO BACKBOARD
LED LIGHT STRIP
120VAC @ 100W
OR 240VAC @
100W
REV DATE: BY:
03 22 JUL 20
JSF
UPDATED LIGHT STRIP KIT PART NUMBERS FOR NEW
LIGHT STRIPS.