manualshive.com logo in svg

Daktronics LARGE MATRIX GALAXY GS6 Series, Installation And Operation Manual, Page: 17 / 47

Share
Download
Daktronics LARGE MATRIX GALAXY GS6 Series Installation And Operation Manual Download Page 17

Network and Communication Installation

13

•  PC 
•  Internet Explorer or Firefox web browser

Configuration Steps Using IP Address

1� 

Connect a computer to the display.

2� 

Turn display on.

3� 

Observe boot sequence - reconfigure computer to same in the IP address range as 

the display and same subnet.

4� 

Manually enter display IP address in web browser followed by :85 (for example, 

http://169.254.13.87:85) to identify the correct connection port.

5� 

Enter 

User Name Dak

 and 

Password DakPassword!

 in the Windows Security window.

6� 

Click 

OK 

to connect to the display (refer to the help file for additional information 

about the configuration utility).

7� 

Click the 

Network

 tile.

8� 

Click the 

Automatic

 button under both the 

IP

 and 

DNS Configuration 

headings.

9� 

Click the 

Save

 button.

10� 

Log out of the configuration utility.

11� 

Turn display off.

12� 

Disconnect the computer from the display and connect display to the network.

13� 

Ensure the display has an established link with the network.

Summary of Contents for LARGE MATRIX GALAXY GS6 Series
















































Reviews:

No comments