FLR3-100/400 Key Fob
28
Price State Number
State 1
State 2
State 3
3
1, 3
2, 3
1, 2, 3
Standard content shown. Custom content is available and will vary from what appears above.
When in configuration mode, numbers that represent selected active price states are
shown on the Fuelight
™
.
Select Active Price States
1�
Press and hold the
LINE 2
minus (–) and
LINE 4
plus (+)
buttons, as shown in
decimal flashes.
2�
Use the
LINE 1
plus (+) and minus (–) buttons to scroll
through the price states until the desired combination
is shown.
3�
Press and hold the
LINE 2
minus (–) and
LINE 4
plus (+)
buttons for ~5 seconds to set the selection and exit
edit mode.
Edit Prices on Displays With Cash Credit
Displays
1�
Press and hold any key fob button for ~5 seconds until
the decimal flashes and the display is in edit mode.
2�
When the Cash/Credit display shows its first price
state, use the plus (+) and minus (–) buttons on the
line you are editing to revise the price.
Note:
$5 is the starting price when prices are set for
the first time.
3�
Wait ~10 seconds until the Cash/Credit display shows
the second active price state, if selected. Use the plus
(+) and minus (–) buttons on the line you are editing
to revise the price.
4�
Wait ~10 seconds again until the Cash/Credit display
shows the third active price state, if selected. Use
the plus (+) and minus (–) buttons on the line you are
editing to revise the price.
5�
Repeat the steps above for each line.
6�
Wait ~10 seconds to set all prices and exit edit mode.
Figure 61:
Cash/Credit/Debit
States Selected
Figure 62:
Credit/Debit States
Selected
Figure 63:
Enter/Exit Active Price
State Configure Mode
