Introduction
1
1 Introduction
This manual explains the troubleshooting and service of Daktronics Outdoor LED
Scoreboards. For additional information regarding the safety, installation, operation, or
service of these displays, refer to the telephone numbers listed in
Exchange and Repair & Return Programs (p�28)
. This manual is not specific to a
particular installation.
Important Safeguards
•
Read and understand all instructions before servicing the display�
•
Disconnect the display power when not in use or when servicing�
•
Disconnect the display power before servicing power supplies to avoid electrical
shock� Power supplies run on high voltage and may cause physical injury if touched
while powered�
•
Do not modify the structure or attach any panels or coverings to the display without
the express written consent of Daktronics�
•
Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void�
•
Do not drop the control equipment or allow it to get wet�
Specifications Label
Power specifications as well as serial and model number information can be found on an
ID label affixed to the display, similar to the one shown in
.
DAKTRONICS 201 DAKTRONICS DR. BROOKINGS, SD PHONE 800-325-8766
SUITABLE FOR SERVICING ONLY WHEN DE-ENERGIZED
PUET FAIRE L'OBJET D'UN ENTRETIEN UNIQUEMENT S'IL EST HORS TENSION
CONFORMS TO
UL STD 48
CERTIFIED TO CSA
STD C22.2 NO. 207
17800
0A-1647-0251 HRev: 00
SN: 1001
04/25/16
3219728 0001
FB-2021-R-PV-120
RMN: DAKT-0405-01
100-240V~1P: 50/60HZ
MAX AMPS AC: 3-1.5A
MAX WATTS AC: 290W
Product Number
Model Number
Figure 1:
Specifications Label
Please have the assembly number, model number, and the date manufactured on hand
when calling Daktronics customer service to ensure the request is serviced as quickly as
possible. Knowing the facility name and/or job number will also be helpful. Note that the
Product Number(s) are sometimes used to distinguish different generations of displays
that have the same model number.
Resources
illustrates a Daktronics drawing label.
The drawing number is located in the lower-
right corner of a drawing. This manual refers to
drawings by listing the last set of digits. In the
example, the drawing would be referred to as
DWG-1007804
.
Drawing Number
Figure 2:
Drawing Label
