Daktronics All Sport 1600 Series, Operation Manual

Page: 39 / 92

Baseball Operation 31
Section 9: Baseball Operation
Sport Insert: LL-2500 (Code 03) (Code 23) (Code 80) (Code 83) (Code 87)
The sport insert drawings are located in Appendix B . The block diagram drawings are located in
Appendix A .
Reference Drawings:
Insert; LL-2500 A/S 1600, Baseball .................................................................... Drawing A-139491
System Riser Diagram; Indoor/Outdoor A/S 1600 .............................................. Drawing A-139544
Refer to the information in Section 2 to start up the console and use the sport insert.
If an insert is lost or damaged, a copy of the insert drawing can be used until a replacement arrives.
If the code number for a scoreboard is unknown, refer to
Appendix C . If the model number of a
scoreboard is unknown, refer to the documentation provided with the scoreboard.
9.1 Baseball Keys
Out +1, 1
The <OUT +1> and <1> keys are used to increment their respective totals.
Display Action
NN = current setting
Press <OUT +1> or <1> to increment their
respective totals.
To change values, first press
<ENTER*/EDIT> then <OUT
+1> or <1> to display the current setting. Enter the
correct number and press <ENTER*/EDIT> .
Ball, Strike, Clear Ball/Strike
The <BALL +1> and <1> keys increment the ball and strike digits. Pressing the
<CLEAR BALL & STRIKE> key clears the digits.
Note: If the ball count value is 4 when <BALL +1> is pressed, the value is blanked out . If the
strike count value is 3 when <1> is pressed, the value is blanked out
.
Display Action
N = current setting
Press the
<BALL +1> or <1> to increment the ball
and strike digits.
Press the
<CLEAR BALL & STRIKE> key to clear the digits
to zero.
Hit, Error
The <HIT> and <ERROR> keys are used to turn on the Hit or Error indicator or digits. In the
table that follows, <ERROR> is used as an example.
I NNI NG-+1
NN
BALL:+1
N