Introduction
1
1 Introduction
This manual provides information to install and fire up a Daktronics digital billboard.
Please read and understand all steps in this manual before beginning the installation
process. Contact the Project Manager with questions.
Limitation of Liability
Failure to perform the following may void factory warranties:
• Install the digital billboard according to the steps in this manual
• Provide proper electrical service
• Ground the display properly
For the full Daktronics Warranty and Limitation of Liability, refer to
Warranty and Limitation of Liability (p�25)
Note:
This applies to initial installation only. Manufacturer does not warranty relocation
of displays.
Important Contact Information
Daktronics Help Desk: 1-877-DAK-HELP (325-4357)
Display Identification
This section provides information that is helpful
in understanding a Daktronics digital billboard
while reading the
table below.
Display Assembly Number
Display Serial Number
Manufacture Month/Date Year
DB-65 Modules High X Modules Wide
RMN: Daktronics - 0200 - 11 Manufactured in Sioux Falls, SD
120/240 VAC, Single Phase, 60 HZ
AMPS (L1/L2) = 21.6/22.9 Total
Total Watts = 5,340
DB-65 Series Improvements
Component
Improvement
Image of Change
Display Doors
• Hook-style doors that hook
into slots on the display’s
backsheet
• Handles on each door for easy
removal
• Mechanical stop holds door in
place without hardware
Internet and
Webcam
Connections
• Located in the second or third
bay from the right
• Enlarged the box to provide
better connection access
Figure 1:
65 Series Display Label
