VISTA INSTALLATION AND OPERATION MANUAL
LIMITED WARRANTY
Da
xten warrants the Vista™ to be in good working order for one year from the date of
purchase from Dakota Computer Solutions or an authorized dealer. Should this product fail to be in good working
order at any time during this one-year warranty period, Dakota Computer Solutions will, at its option, repair or
replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All
replaced parts become the property of Dakota Computer Solutions. This limited warranty does not include service
to repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit,
including static discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Da
xten
or an authorized repair center providing a proof of purchase date. You agree to insure the Unit
or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to
use the original shipping container or its equivalent. You must call for a return authorization number first. Under no
circumstances will a unit be accepted without a return authorization number. Contact an authorized repair center
or Dakota Computer Solutions for further information
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A
PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME COUNTRIES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE REMEDY
SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL DAKOTA COMPUTER
SOLUTIONS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS OR
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY
TO USE SUCH PRODUCT, EVEN IF DAKOTA COMPUTER SOLUTIONS OR AN AUTHORIZED DEALER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
© Copyright 2000. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means,
electronic or mechanical, including photocopying and recording, without the prior written permission of Dakota
Computer Solutions.
IBM
®
AT, and PS/2 are trademarks of International Business Machines Corp.
Microsoft
®
, Microsoft Windows
™
, Microsoft Intellimouse
™
are registered trademarks of Microsoft Corp.
Multisync is a trademark of NEC Technologies, Inc.
Printed in the USA
Revision 1.02
Manual Part No. 8017-01
NOTE: This equipment complies with the requirements of European EMC directive 89/336 EEC in respect of EN55022
Class B, EN 50082-1 and EN 60555-2.
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
