PR-9
Sonic thickness tester
21
The
PR-9
uses a custom glass segmented display that is equipped with a backlight
for use in low light conditions. The options are on/off/auto, where the auto setting
only lights the display when the gauge is coupled to the material and receiving a
measurement.
The steps below outline how to toggle the options:
Backlight
1) Press the
key to access the backlight status options. The edit icon will
be illuminated and flashing.
2) Use the
keys to toggle status on/off/auto.
Note:
Pressing the
key prior to pressing the
key will abort to the
measurement screen without saving changes.
3) When the desired
LITE
setting is displayed, press the
key to set the
status and edit the
BRT
(brightness) option.
4) Use the
keys to scroll through the
BRT
(LO, MED, HI)
options.
5) When the desired
BRT
setting is displayed, press the
key to set the
brightness and return to the measurement screen.
6.4 Lock
The lock feature was built into the
PR-9
for the purpose of locking the operators out
of editing any of the gauge settings, for purposes of consistency between operators.
When the lock feature is enabled, the gauge calibration functionality cannot be
altered, as well as any of the individual features in the gauge. The only keys that are
Summary of Contents for PR-9
Page 2: ......
