Manual # 650527A
12” CAT5 cable
WARNING:
This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
6. Connect one of two 12” CAT5 cables to the Tachometer, and the other end to either port on the
Speedometer, connecting the two halves; the other 12” CAT5 cable goes from the center indicator
connection to an open port on either the Speedometer or Tachometer. Finally, with the 36” CAT5
cable, connect one end to the last open port on the Speedometer or Tachometer, and as the
assembled cluster is installed into the dash, carefully route the other end of the cable to the control
box mounting location and use the five (5) supplied 1” screws to mount the assembly to the dash.
7. Refer to the main manual for wiring instructions to complete the VHX installation.
12” CAT5 cable
36” CAT5 cable
